Flat Construction Cost Calculator

Pick 1 to 4 BHK, adjust room sizes and see what the flat costs to build, including its share of stairs, lobbies and lifts. The rate is shown on carpet, built-up and super built-up area, so you can check any quote on the same basis.

Updated Rates reviewed September 2026 Built by Bhavin Sheth Runs in your browser, no sign-up

Flat type

Sets bedrooms, bathrooms and balconies.

Rooms

Carpet area 760 sq.ft.

SpaceQtySize (sq.ft.)

Sizes are internal room areas. Balconies are counted in built-up area but not in carpet area.

Share of common areas

Stairs, lobby, lift well, shafts.

25%

Ask the builder for the project's loading. Use 0% for a single flat with no shared areas.

Include

Match what you are budgeting for.

Cost groups

  • Structure₹6,44,00028% of total, ₹850 per carpet sq.ft.
  • Finishes and services₹5,71,00025% of total, ₹750 per carpet sq.ft.
  • Labour₹4,25,00019% of total, ₹560 per carpet sq.ft.
  • Common areas share₹4,05,00018% of total, ₹530 per carpet sq.ft.
  • Soft costs₹2,19,00010% of total, ₹290 per carpet sq.ft.
  • Total₹22,63,000Range ₹20,37,000 to ₹24,89,000

Inside the common and optional groups

  • Common area shell₹2,65,000230 sq.ft. of loading at the flat’s structure rate plus half its finish rate
  • Lift, fire and pumps₹1,39,000Share for a mid-rise building
  • Professional fees₹50,000
  • Approvals and fees (3%)₹61,000
  • Contingency (5%)₹1,08,000
  • FurnishingoffSwitch on under Include to add furniture and electronics

Carpet, built-up and super built-up: which one is your quote using?

The same flat has three areas, and a rate per sq.ft. means little until you know which one it divides by.

  • Carpet areasmallestUsable floor inside the flat, including internal partition walls, excluding external walls, service shafts and the exclusive balcony. This is the RERA definition, and projects registered under RERA are sold on it.
  • Built-up areacarpet × 1.12 + balconyCarpet area plus external and shared walls, ducts and the balcony. Construction quantities in this calculator are worked out on this area.
  • Super built-up areabuilt-up × (1 + loading)Built-up area plus the flat's share of stairs, lobbies, lift wells and other common areas. Older quotes and brochures often use this larger figure.

Worked example (2 BHK, 25% loading)

Rooms without balcony: 760 sq.ft. carpet

760 × 1.12 + 70 sq.ft. balcony = 921 sq.ft. built-up

921 × 1.25 = 1,152 sq.ft. super built-up

A cost of ₹20 lakh is ₹2,632 per carpet sq.ft. but only ₹1,737 per super built-up sq.ft. Same flat, same money.

How the flat estimate is built

Five layers are added together. The rates below are the configured planning values, so you can see where your local price may differ.

Structure = built-up area × (cement, steel, sand, aggregate, bricks) × quality × height × location

Finishes and services = plaster, tiles, paint, false ceiling, wiring, pipes per sq.ft. + bathroom sets, doors, distribution board per unit

Labour = 30%, 35% or 40% of material value by quality

Common areas = loading area × structure and half-finish rate + lift, fire and pumps per super built-up sq.ft.

Soft costs (optional) = professional fee + 3% approvals + 5% contingency

  • LocationRural ×0.85Semi-urban ×0.95Taluka HQ ×1.00District HQ ×1.10Metro ×1.25
  • Material qualityBasic ×0.80Standard ×1.00Premium ×1.50
  • Building height, structureLow-rise ×1.00Mid-rise ×1.06High-rise ×1.15
  • Lift, fire and pumpsLow-rise ₹0Mid-rise ₹110High-rise ₹190Per super built-up sq.ft., before location.
  • Walls and shafts+12%Carpet to built-up, before adding the balcony
  • Result range±10%Shown because rates are planning values, not live quotes

What a builder's price has that this estimate doesn't

If you are buying rather than building, the gap between this figure and the quoted price is made of these items.

In this estimate

  • Structure and finishes of the flat itself.
  • Labour linked to material value.
  • Share of common areas through the loading you set.
  • Lift, fire and pump systems for mid-rise and high-rise buildings.
  • Soft costs and furnishing when switched on.

Only in the sale price

  • Land, or the flat's undivided share of it.
  • Developer margin, finance cost and marketing.
  • GST on under-construction flats, which varies by project category.
  • Stamp duty and registration, set by each state.
  • Parking, club and maintenance deposits, often charged separately.

Before you pay a builder or contractor

Three checks that use the numbers above.

  1. Get the rate on carpet area

    Ask for the price per carpet sq.ft. and the loading. If only a super built-up rate is given, convert it with the loading before comparing.

  2. Look up the RERA registration

    Check the project on your state's RERA website. Under RERA, a builder cannot take more than 10% of the price before a registered agreement for sale.

  3. Match the specification sheet

    Compare tile, sanitaryware, wiring and door specifications with the quality level you selected here, and get them written into the agreement.

Questions

Is this the price a builder will charge for a flat?

No. It estimates the cost of constructing the flat and its share of common areas. A builder's sale price also includes land, the developer's margin, marketing, parking, GST, stamp duty and registration. Use this figure to judge how much of a quoted price is construction and how much is everything else.

How are carpet, built-up and super built-up area calculated here?

Carpet area is the sum of your room sizes excluding the balcony, in line with how RERA defines carpet area. Built-up area adds 12% for walls and shafts plus the balcony. Super built-up area adds your loading percentage on top of built-up area for the flat's share of staircases, lobbies, lift wells and other common areas.

What loading percentage should I use?

Loading differs from project to project, so ask the builder for the exact figure or work it out as super built-up area divided by built-up area, minus one. The calculator starts at 25%. Set it to 0% if you are building a single flat with no shared areas.

Why is the cost per sq.ft. different on each area basis?

The total cost is the same; only the area it is divided by changes. Carpet area is the smallest, so its rate is the highest, and super built-up area is the largest, so its rate is the lowest. Always compare two quotes on the same area basis.

How does building height change the estimate?

Low-rise buildings up to G+3 use the base structural rate and no lift. Mid-rise (G+4 to G+7) adds 6% to structural materials and ₹110 per super built-up sq.ft. for lift, fire and pump systems. High-rise (G+8 and above) adds 15% and ₹190. These are configured planning assumptions.

What are soft costs and furnishing in this calculator?

Soft costs are professional fees (₹30,000, ₹50,000 or ₹80,000 by quality), 3% for approvals and fees, and a 5% contingency. Furnishing covers furniture, electronics and safety items per carpet sq.ft. Soft costs are on by default and furnishing is off; switch either one to match what you are budgeting for.

Can I compare 1, 2, 3 and 4 BHK?

Yes. The By BHK tab recalculates all four flat types with your current location, quality, building height, room sizes and extra rooms, so you can see how cost and area change with each extra bedroom.

Does the calculator store or send my inputs?

No. Everything is calculated in your browser without third-party scripts. Your inputs only leave the page if you copy the link or share on WhatsApp yourself.

Related calculators

Cost to build₹22.63 lakh